Close

Academic References

Academic References

  1. R. Glav, 1985. Computer simulation of reflective mufflers. MSc-thesis, The Royal Institute of Technology (KTH), Stockholm.
  2. H. Bodén and M. Åbom, 1986.  Influence of errors on the two-microphone method for measuring acoustic properties in ducts. Journal of the Acoustical Society of America 79(2), pp. 541-549.
  3. M. Åbom and H. Bodén, 1988.  Error analysis of two-microphone measurements in ducts with flow. Journal of the Acoustical Society of America 83(6), pp. 2429-2438.
  4. R. Glav, M. Åbom, H. Bodén, 1988. An acoustic model for automobile catalytic converters. Proceedings Inter-Noise 88 (Invited paper), 1261-1266.
  5. M. Åbom, 1989. Studies of sound propagation in ducts and mufflers. PhD-Thesis, The Royal Institute of Technology, TRITA-TAK-8902.
  6. H.Bodén, 1989. Characterization of fluid machines as sources of fluid borne noise. PhD-Thesis, The Royal Institute of Technology, TRITA-TAK-8906.
  7. R. Glav, 1990. Computer simulation of sound propagation in ducts. Proceedings, Inter-Noise 90, 553-556.
  8. M. Åbom, 1990. Derivation of the four-pole parameters including higher order mode effects for expansion chamber mufflers with extended inlet and outlet.       Journal of Sound and Vibration 137(3), pp. 403-418.
  9. M. Munjal and A. Doige, 1990. Theory of a two-source location method for direct experimental evaluation of the four-pole parameters an Aero Acoustic element, Journal of Sound and Vibration, Vol. 141(2), pp. 323-333.
  10. M Åbom, 1991. Measurement of the scattering-matrix of acoustical two-ports, Mechanical Systems and Signal Processing Journal, Vol. 5(2), pp. 89-104.
  11. M. Åbom, 1992. A measurement method to determine acoustic 4-pole matrices. Proceedings ISATA 92, 169-175.
  12. R. Glav 1992. Computer simulation of sound propagation in inlet and exhaust systems. Proceedings ISATA 92, 161-167.
  13. H. Bodén and M. Åbom, 1996. IC-engines as sources of sound in exhaust systems. Forum Acusticum 96 (Invited paper).
  14. R. Glav, 1994. On acoustic modeling of silencers, PhD Thesis, The Royal Institute of Technology (KTH), Stockholm.
  15. J. Lavrentjev, M Åbom and H Bodén, 1995. A measurement method for determining the source data of acoustic two-port sources. Journal of Sound and Vibration 183(3), pp. 517-531.
  16. H. Bodén and Mats Åbom, 1995. Modelling of fluid machines as sources of sound in duct and pipe systems. Acta Acustica 3, Dec., pp. 1-12.
  17. R. Glav and M. Åbom, 1997. A general formalism for analyzing acoustic two-port networks. Journal of Sound and Vibration 202(5), pp. 739-747.
  18. R. Glav, M. Åbom and S. Nygård, 1997. Analysis of multi-branch flow ducts. Proceedings, Inter-Noise 97, 359-362.
  19. S. Nygård, 1997. Framtagning och test av kod för ett generellt 2-ports element. MSc-Thesis, The Royal Institute of Technology (KTH), TRITA-FKT EX 1997:11.
  20. M. Åbom and R. Glav, 1998. A CAD tool for acoustic analysis of intake and exhaust systems. Proceedings, EAA Symposium on Transport Noise and Vibration 98, 181-184.
  21. R. Glav and M. Åbom, 1998. Application of the 2-port method to commercial IC-engine exhausts. Proceedings, EAA Symposium on Transport Noise and Vibration 98, 185-188.
  22. H. Gijrath, S.Nygård and M.Åbom, 2001. A matrix formalism for fluid-borne sound in pipe systems. Proceedings, ICSV 8, paper no. 578.
  23. S. Nygård, 2002. Low frequency modelling of complex duct networks. TechL Thesis, The Royal Institute of Technology (KTH), Stockholm.
  24. Z. Tao and A Seybert, 2003. A Review of Current Techniques for Measuring Muffler Transmission Loss, Proceedings of SAE Conference, Travers City.
  25. T. Elnady, 2004. Modeling and Characterization of perforates in lined ducts and mufflers. , PhD Thesis, The Royal Institute of Technology (KTH), Stockholm.
  26. T. Elnady and M. Åbom, 2005. Modeling perforates in mufflers using two-ports, 12th International Congress on Sound and Vibration, Lisbon, Portugal, July 11-14.
  27. S. Allam and M. Åbom, 2005. Acoustic modelling and testing of diesel particulate filters. Journal of Sound and Vibration 288(1-2), pp. 255-273.
  28. T. Elnady and M. Åbom, 2006. SIDLAB: new 1D sound propagation simulation software for complex duct networks, 13th International Congress on Sound and Vibration, Vienna, Austria, July 2-6.
  29. S. Allam and M. Åbom, 2006. Sound propagation in an array of narrow porous channels with application to diesel particulate filters. Journal of Sound and Vibration 291, pp. 882-901.
  30. S. Allam and M. Åbom, 2006. Modeling and testing of After-Treatment Devices. ASME Journal of Vibration and Acoustics 128, pp. 347-356.
  31. T. Elnady, 2007. A Platform to Measure Transmission Loss of Mufflers with Flow, Inter-Noise 2007, Istanbul, Turkey.
  32. T. Elnady, S. Elsaadany, and M. Åbom, 2009. Flow and pressure drop calculation using two-ports, 15th International Congress on Sound and Vibration, Daejeon, Korea, July 6-10